Exporting server
profile to USB drive or network share
Before exporting
the server profile, make sure that the following pre-requisites are
met:
A software license for the Dell PowerEdge servers
is installed on the server. For more information about managing licenses
using the iDRAC web interface, go to Overview > Server > Licenses, and see iDRAC Online Help.
vFlash SD card is installed in the system and must
contain the backup image file.
USB drive has a minimum free space of 384 MB.
Network share is accessible and has a minimum free
space of 384 MB.
Use the same vFlash SD card that was used during
backup.
NOTE: If FIPS
is enabled, you cannot perform any actions associated with the vFlash
SD card, such as exporting or backing up server profile to the vFlash,
or importing server profile using vFlash.
To export the server profile to a USB drive or a network share:
Select either USB Drive or Network Share, enter the details, and
then click Finish.
NOTE: You can also use a USB drive that is attached to the client system
while operating remotely. To use the USB drive remotely, use the Virtual Media feature. For more information, see the Integrated Dell Remote Access Controller (iDRAC) User’s Guide at www.dell.com/esmmanuals.
The Backup_<service_tag>_<time_stamp>.img file is exported to the specified location.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\