SATA Settings
Screen
- Menu Item
- Description
- Embedded SATA
- Allows the embedded SATA to be set to Off, ATA, AHCI, or RAID
mode. By default, Embedded SATA is set to AHCI Mode.
- Port A
- Auto enables BIOS support for the device attached to SATA port
A. By default, Port A is set to Auto.
- Port B
- Auto enables BIOS support for the device attached to SATA port
B. By default, Port B is set to Auto.
- Port C
- Auto enables BIOS support for the device attached to SATA port
C. By default, Port C is set to Auto.
- Port D
- Auto enables BIOS support for the device attached to SATA port
D. By default, Port D is set to Auto.
- Port E
- Auto enables BIOS support for the device attached to SATA port
E. By default, Port E is set to Auto.
- Port F
- Auto enables BIOS support for the device attached to SATA port
F. By default, Port F is set to Auto.
NOTE: Ports A,
B, C, and D are used for the backplane drives, port E for the optical
drive (CD/DVD), and port F for the tape drive.