Configuring
system time and date
To set the
time and date for the managed system:
- Start Lifecycle Controller. For more information, see Starting Lifecycle
Controller.
- From the Lifecycle Controller Home page, select Hardware Configuration.
- In the right pane, select Configuration Wizards.
- Under System Configuration Wizards, click System Time and Date Configuration.
The default system time and system date displayed
in Lifecycle Controller is the date and time reported by the system
BIOS.
- Modify the System Time and System Date (HH:MM:SS AM or PM), as required.
- Click Finish to apply the changes.
Data is not available for the Topic