Dell EMC PowerEdge T440 Installation and Service Manual

Converting the system from tower mode to rack mode

1. Remove the control-panel assembly.
2. Install the rack slide cover by performing the following steps:
   1. Slide the rack slide cover between the system's side cover and the chassis.
   2. Slide the rack slide cover toward the back of the system until the tabs on rack slide cover locks with the tabs extending from the chassis.
3. Install the control panel assembly.
4. Install the rack ears by performing the following steps:
   1. Align the three screw holes on the rack ears with the screw holes on the top and the bottom of system.
   2. Using a Phillips #2 screwdriver, secure the rack ears to the system.