Dell Storage Center SCv2000 and SCv2020 Storage System Deployment Guide

Guidelines for Using SFP+ Transceiver Modules

The SCv2000/SCv2020 storage system supports the use of SFP+ transceiver modules for 16 Gb FC connectivity.

Before installing SFP+ transceiver modules and fiber-optic cables, read the following guidelines.

CAUTION: When handling static-sensitive devices, take precautions to avoid damaging the product from static electricity.

Use only Dell supported SFP+ transceiver modules with the SCv2000/SCv2020. Other generic SFP+ transceiver modules are not supported and may not work with the SCv2000/SCv2020.
The SFP+ transceiver module housing has an integral guide key that is designed to prevent you from inserting the transceiver module incorrectly.
Use minimal pressure when inserting an SFP+ transceiver module into an FC port. Forcing the SFP+ transceiver module into a port may damage the transceiver module or the port.
The SFP+ transceiver module must be installed into a port before you connect the fiber-optic cable.
The fiber-optic cable must be removed from the SFP+ transceiver module before you remove the transceiver module from the port.