SC460 Expansion Enclosure Owner's Manual

To determine which power supply unit (PSU) failed, use the Storage Manager.

1. Click the Hardware tab.
2. In the Hardware tab navigation pane, select and expand the Storage Center.
3. In the Hardware Alerts area, find the hardware alert that identifies the expansion enclosure with the failed power supply.
   Figure 1. Hardware Alert Identifying the Expansion Enclosure with the Failed Power Supply
   
   

   

   
   
   
4. In the Hardware tab navigation pane, expand the expansion enclosure identified in the previous step.
5. Select Power Supplies. The status of each power supply is displayed in the Power Supplies tab.
6. Select the failed power supply. The location of the failed power supply is displayed in the Power Supply View tab.
   Figure 2. Rear View of the Expansion Enclosure Showing the Failed the Power Supply