SC460 Expansion Enclosure Owner's Manual

Use this procedure to install an EMM.

1. Align the EMM with the empty slot in the chassis.
2. Push the EMM into the chassis until it stops.
3. Turn the screw handle clockwise until a single click is heard.

   The single click indicates the EMM is fully seated.

   Figure 1. Installing an EMM
   
   

   

   
   
   
4. Match the labels on the SAS cables with the correct connectors on the EMM.
5. Reconnect the SAS cables to the EMM.
6. Wait for the expansion enclosure to recognize the EMM and determine its status.
7. In Storage Manager, make sure that the EMM is recognized and shown as up and running.