SC7020 Series Storage System Drives
The
SC7020 series storage system supports
Dell
Enterprise Plus drives.
- The
SC7020storage controller supports both spinning hard drives and SSDs.
- The
SC7020Fstorage controller supports SSDs.
The drives in the
SC7020 series storage system are installed horizontally. The indicators on the drives provide status and activity information.
Indicators on the drive.
Item
| Control/Feature
| Indicator Code
|
---|
1
| Drive activity indicator
| - Blinking green – Drive has I/O activity
- Steady green – Drive is detected and has no faults
|
2
| Drive status indicator
| - Steady green – Normal operation
- Blinking green – A command was sent to the drive to make the LED blink so that you can identify the drive in the rack.
- Blinking amber – Hardware or firmware fault
|