The
SC7020 series storage system supports hot-swappable hard drives.
In the
SC7020storage system, a minimum of 4 SSDs or 7 drives must be installed in the chassis or in an
expansion enclosure.
In the
SC7020Fstorage system, a minimum of 4 SSDs must be installed in the chassis or in an
expansion enclosure.
The drives are installed from left to right, and then top to bottom. The first row of drives are numbered from 0–4 from left to right, the second row of drives are numbered from 5–9 from left to right, and so on.
Storage Manager identifies drives as
XX-YY, where XX is the number of the unit ID of the
storage system and YY is the drive position inside the
storage system.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\