Vostro 7590 Service Manual

PDF

System configuration

Table 1. System Configuration options. The table describes the system configuration options.
Option	Description
SATA Operation	Allows you to configure the operating mode of the integrated SATA hard-drive controller. The options are: Disabled AHCI RAID On—By default, the RAID On option is enabled. NOTE: SATA is configured to support RAID mode.
Drives	Allows you to enable or disable various drives on board. The options are: SATA-0 SATA–1 M.2 PCIe SSD-0 M.2 PCIe SSD-1 By default, all the options are enabled.
SMART Reporting	This field controls whether hard drive errors for integrated drives are reported during system startup. This technology is part of the SMART (Self Monitoring Analysis and Reporting Technology) specification. By default, the Enable SMART Reporting option is disabled .
USB Configuration	Allows you to enable or disable the internal/integrated USB configuration. The options are: Enable USB Boot Support Enable External USB Port By default, all the options are enabled. NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings.
Thunderbolt Adapter Configuration	Allows you to configure the Thunderbolt adapter security settings within the operating system. The options are: Thunderbolt—This option is enabled by default. Enable Thunderbolt Support Enable Thunderbolt (and PCIe behind TBT) Pre-boot Modules No Security User Authorization—This option is enabled by default. Secure Connect Display Port and USB Only
Thunderbolt Auto Switch	Allows you to configure the method used by the Thunderbolt controller to perform the PCIe device enumeration. By default, the Auto switch option is enabled. The options are: Native Enumeration BIOS Assist Enumeration
Audio	Allows you to enable or disable the integrated audio controller. By default, the Enable Audio option is selected. The options are: Enable Microphone Enable Internal Speaker By default, all the options are enabled.
Fingerprint Reader	Enables or disables the fingerprint reader device. The options are: Enable Fingerprint Reader Device Enable Finger Reader Single Sign On By default, both the options are enabled.
Miscellaneous devices	Allows you to enable or disable the following devices: Enable Camera Enable Hard Drive Free Fall Protection WiFi Radio Enable Secure Digital (SD) Card By default, all the options are enabled.