Dell Wyse ThinOS Version 8.6 and ThinOS Lite 2.6 Operating System Release Notes

PDF

INI parameters

The following table provides the list of INI parameters:

NOTE: Every INI parameter is associated with a parent INI parameter. Use these INI parameters along with the corresponding parent INI parameters.

Table 1. INI parametersINI parameters
INI parameters	Description
Device=mouse [Speed=[1-11]] [Swap={yes, no}] [FlipFlopWheel={yes, no}]	The speed parameter is used to configure the speed of the moving mouse. 1 is the slowest, and 11 is the fastest. The default value is 6. This parameter replaces the MouseSpeed parameter. If the option Swap is set to yes, the right button is set as the primary button. The default value is no. If the option FlipFlopWheel is set to yes, the mouse scroll wheel is inverted. The default value is no.
[MultiVDISupport= {yes, no}]	This parameter enables multi VDI Support that allows simultaneous login for Blast and ICA published desktops (if configured) when broker type is VMware View. The default value in BIOS is set to no.
[BatteryScreenSaver={0}]	This parameter disables screensaver during Battery Mode. This parameter is applicable to Wyse 5470 Thin Client.
[ConnectionBroker = TeradiciCloudAccess]	New value TeradiciCloudAccess is added for INI ConnectionBroker to set Teradici as the broker. TeradiciCloudAccess is the Teradici broker, and it is only available with the PCoIP build.
[Swap={no, yes}]	The default value is no. The Yes or no option is used with older ThinOS 7.x builds to swap dual monitors when Mainscreen is set as 1 or 2. Swap=yes puts monitor 2 on the left, or on top of monitor 1 according to the orientation.
[Include=<$mac.ini file or {username}.ini file>]	<$MAC.ini> loads /wnos/inc/mac-address.ini. <$EMAC.ini> loads /wnos/inc/<ethernet 1 interface mac>.ini <$WMAC.ini> loads /wnos/inc/<wireless interface mac>.ini NOTE: The file name does not include the symbol : in the MAC address. See also the Exit parameter for information on how to stop the Include parameter. <{username}.ini> Loads /wnos/inc/ {username}-address.ini. The file name does not include the symbol: in the {username} address. See also the Exit parameter for information on how to stop the Include parameter.

For more information about the newly added INI parameters, see the Dell Wyse ThinOS 8.6 INI Reference Guide at www.dell.com/support.