PCoIP connections using Teradici Remote Workstation card
In ThinOS version 8.6, you can directly configure the PCoIP connection after you connect either the TERA2240 Remote Workstation card or TERA2220 Remote Workstation card. This feature only works with the direct PCoIP connection, and does not work when you connect using the Horizon View broker.
NOTE: The host card version must match the Teradici PCoIP SDK version 2.9. The SDK in ThinOS does not function similar to Teradici zero client firmware. For example, the SDK in ThinOS does not support USB redirection with the host card connection. This feature is mainly for workstation users working on the server remotely.
The following table lists the supported platforms and the corresponding maximum displays that are tested for TERA2220 and TERA2240 host cards:
Table 1. Support matrix—For reference onlySupport matrix
Platform
ThinOS
ThinOS with PCoIP
Maximum displays for TERA2220 host card
Maximum displays for TERA2240 host card
Wyse 5070 thin client—Celeron
Not supported
Supported
2—with 2560 x 1440 resolution
2—with 2560 x 1440 resolution
Wyse 5070 thin client—Pentium
Not supported
Supported
2—with 2560 x 1440 resolution
2—with 2560 x 1440 resolution
Wyse 5070 Extended thin client
Not supported
Supported
2—with 2560 x 1440 resolution
4—with 1920 x 1200 resolution
Wyse 3040 thin client
Not supported
Supported
2—with 2560 x 1440 resolution
2—the resolution depends on your display setup
Wyse 5060 thin client
Not supported
Supported
2—with 2560 x 1440 resolution
2—with 2560 x 1440 resolution
Wyse 5010 thin client
Not supported
Supported
2—with 1920 x 1200 resolution
2—with 1920 x 1200 resolution
Wyse 5040 AIO thin client
Not supported
Supported
2—with 1920 x 1200 resolution
2—with 1920 x 1200 resolution
Wyse 3030 LT thin client
Not supported
Supported
2—with 2560 x 1440 resolution
2—the resolution depends on your display setup
Wyse 7010 thin client
Not supported
Not supported
Not supported
Not supported
Wyse 3020 thin client
Not supported
Not supported
Not supported
Not supported
Wyse 3010 thin client
Not supported
Not supported
Not supported
Not supported
Table 2. Teradici support matrixTeradici support matrix
Display type
Maximum number of displays
Teradici PCoIP processor
Maximum resolution
Dual display
2
TERA2220
Single display with 2560 x 1600 resolution or two displays with 1920 x 1200 resolution
Quad display
4
TERA2240
2 displays with 2560 x 1600 resolution or four displays with 1920 x 1200 resolution
The following table provides performance data statistics for host card TERA2240 on Wyse 5070 thin client with Celeron processor:
Table 3. Performance data statisticsPerformance data statistics
Number of display
Maximum rate defined by user (Mbps)
Input change rate (Mbps)
Output process rate
Maximum Tx bandwidth (Mbps)
1
30
30
22
50
30
30
21
50
60
59
22
101
60
59
30
105
2
30
30
11
83
30
30
10
50
60
57
11
135
60
57
9
185
For information about configuring PCoIP Direct Connect, see the Dell Wyse ThinOS Version 8.6 Administrator's Guide at www.dell.com/support.
NOTE: The TERA2220 host card is tested on the workstation Dell Precision 5820 Tower with graphics card NVIDIA Quadro P2000.
Host card reference documents on Teradici official website: