Dell Wyse Management Suite Version 3.1 Administrator's Guide

Configure Wyse Management Suite client settings for Dell Hybrid Client

As an administrator, you can configure the Wyse Management Suite agent behavior with respect to Dell Hybrid Client configurations. Administrators can also configure devices to apply configurations outside of business hours.

1. Go to the Groups & Configs page, and select a group.
2. From the Edit Policies drop-down menu, click Hybrid Client.
   The Configuration Control | Hybrid Client window is displayed.
3. Click the Standard option.
4. Go to WMS Settings > WMS Client Settings.
5. To configure the business hours and business days for the device group, click Add Row in the Business Hour field and the days from the Business days drop-down menu.
6. To enable the agent to report user sessions, enable the Enable Session Reporting option and select the timing from the Report Session drop-down menu. The available options are:
   • Send user session at run time—The Dell Client Agent sends the user session report every time a user logs off from the device.
   • Send user session at check-in time—The Dell Client Agent sends the user session report every 8 hours.
   • Send user session outside of business hours—The Dell Client Agent sends the user session report outside of business hours which is configured in step 5.
7. To deploy the configurations to any device based on the user level configurations, enable the Enable User Personalization Roaming option. If this option is enabled, the settings that are configured by a user on a device are saved in the Wyse Management Suite server and the configurations are applied automatically when a user logs in to a different device. The configured settings take precedence over all other configurations.
8. To enable notifications on the device, enable the Enabling Push Notification option. If this option is enabled, the settings that are configured are applied immediately after you click Save & Publish. If you disable this option, the configurations are applied when the device sends a heartbeat signal.
   NOTE: If you disable the option, the application deployment may enter an error state since Wyse Management Suite does not send the push notification to Dell Hybrid Clients.
9. To apply the configuration outside of the specified business hours, select the option from the drop-down menu. The available options are:
   • Immediately—If you select this option, the configurations are applied immediately after you click Save & Publish.
   • Outside of specified business hour—If you select this option, the configurations are applied outside of business hours which are configured in step 5.
   • When no user has logged on to the device for a period of time—If you select this option, the configuration are applied when no user has logged in to the device for defined time. You can specify the idle time after which the configurations are applied to the device.
   NOTE: You can also configure these settings for a particular device from the Devices page. For more information, see Configure a device level policy.