Dell Wyse Management Suite Version 3.1 Administrator's Guide

Configuring other settings

You can use the following settings to enforce the APNS Warnings, License Expiration Warnings, and other Self Service Legal Agreements.

Dismiss License Expiration Warning on Dashboard page—Select this check box to disable the warning for a license expiration from displaying on the Dashboard page.
Enable Advanced Dell Wyse Cloud Connect options in Android Settings policy configuration page (Note: Professional Tier Only)—Select this option to enable Advanced Dell Wyse Cloud Connect options in the Android Settings policy configuration page.
Heartbeat interval—Enter the time. The device sends a heartbeat signal every 60 minutes to 360 minutes.
Checkin interval—Enter the time. The device sends full checking signal every 8 hours to 24 hours.
Not Checked In compliance alert—Enter the number of days before a device triggers a Not Checked In compliance alert. The range is 1–99.
WMS Console timeout—Enter the idle time in minutes after which the user is logged out of the console. This setting can be configured by any global administrator. The default value is 30 minutes.
Enrollment Validation—When the Enrollment Validation option is enabled, the auto-discovered devices are in Pending Validation state in the Devices page. The tenant can select a single device or multiple devices in the Devices page and validate the enrollment. The devices are moved to the intended group after they are validated.