Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

XPS 13 Service Manual

Procedure

  1. Disconnect the battery cable from the system board.
  2. Peel off the tape that secures the speaker cable to the battery.
    Figure 1. Removing the batteryImage: Removing the battery cable and tape.
    1. battery cable
    2. speaker cable
    3. tape (6)
  3. Remove the screw (M1.6x4) that secures the battery to the palm-rest assembly.
  4. Remove the three screws (M2x2) that secure the battery to the palm-rest assembly.
  5. Lift the battery off the palm-rest assembly.
    Figure 2. Removing the batteryImage: Removing the battery.
    1. palm-rest assembly
    2. battery
    3. screws (4)
  6. Turn the computer over, open the display, and press the power button for about 5 seconds to ground the computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\