メイン コンテンツに進む
  • すばやく簡単にご注文が可能
  • 注文内容の表示、配送状況をトラック
  • 会員限定の特典や割引のご利用
  • 製品リストの作成とアクセスが可能
  • 「Company Administration(会社情報の管理)」では、お使いのDell EMCのサイトや製品、製品レベルでのコンタクト先に関する情報を管理できます。

Inspiron 14 5415 Service Manual

Installing the speakers

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

The following image(s) indicate the location of the speakers and provides a visual representation of the installation procedure.

Installing the speakers

Steps

  1. Using the alignment posts, place the left and right speakers on the palm-rest and keyboard assembly.
    NOTE Ensure that the alignment posts are threaded through the rubber grommets on the speaker.
  2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
  3. Connect the speaker cable to the connector on the system board.
  4. Adhere the tape that secures the speaker cable to the palm-rest and keyboard assembly.
  5. Connect the touchpad cable to the system board and close the latch.
  6. Connect the keyboard cable to the system board and close the latch.
  7. Connect the keyboard-backlight cable to the system board and close the latch.
  8. Place the I/O-board and antenna cables back into place and adhere the tapes that secure them to the palm-rest and keyboard assembly.

Next steps

  1. Install the 3-cell battery or the 4-cell battery, whichever applicable.
  2. Install the base cover.
  3. Follow the procedure in After working inside your computer.

このコンテンツを評価する

正確
有益
分かりやすい
この記事は役に立ちましたか?
0/3000 characters
  1~5個の星の数で評価してください。
  1~5個の星の数で評価してください。
  1~5個の星の数で評価してください。
  この記事は役に立ちましたか?
  コメントでは、以下の特殊文字は利用できません: <>()\