This section
describes the variables both on Traditional and Enhanced varbinds
that are sent to the management console to provide additional information
about a trap or alert generated by some event on your system. The
trap variables presented here apply to all Instrumentation and RAC
traps. Trap variables are sent in the order listed and are reserved
for use only in traps. When a varbind is created for a trap variable,
a zero is appended to the object ID (OID) to create the OID for the
varbind.
The messages associated with each alertMessage varbind
are available in the Message Reference Guide and can be found
by matching the alert ID in the MIB to the event ID in the Message
Reference Guide.
Table 1. Trap Variables
Variable Name
alertSystemalertSystem
Object ID
1.3.6.1.4.1.674.10892.1.5000.10.1
Description
Identifies the system generating the alert.
Syntax
DisplayString
Table 2. Table Index
OID
Variable Name
alertTableIndexOIDalertTableIndexOID
Object ID
1.3.6.1.4.1.674.10892.1.5000.10.2
Description
Specifies the object identifier for the index attribute in
the table that contains the object causing the alert. Uniquely identifies
the object causing the alert and can be used to correlate different
alerts caused by the same object.
Syntax
OBJECT IDENTIFIER
Table 3. Message
Variable Name
alertMessagealertMessage
Object ID
1.3.6.1.4.1.674.10892.1.5000.10.3
Description
Describes the alert.
Syntax
DisplayString
Table 4. Current Status
Variable Name
alertCurrentStatusalertCurrentStatus
Object ID
1.3.6.1.4.1.674.10892.1.5000.10.4
Description
Specifies the current status of the object causing the alert.
Syntax
DellStatus
Table 5. Previous Status
Variable Name
alertPreviousStatusalertPreviousStatus
Object ID
1.3.6.1.4.1.674.10892.1.5000.10.5
Description
Specifies the previous status of the object causing the alert.
Syntax
DellStatus
Table 6. Data
Variable Name
alertDataalertData
Object ID
1.3.6.1.4.1.674.10892.1.5000.10.6
Description
Provides Server Administrator-defined data related to the alert.
Syntax
Octet String
The following variables show the Enhanced varbinds:
Table 7. Message ID
Variable Name
alertMsgIDalertMsgID
Object ID
1.3.6.1.4.1.674.10892.4.5000.10.7
Description
Specifies the enhanced message ID for the object generating
the alert.
Syntax
DisplayString
Table 8. System FQDN
Variable Name
alertSystemFQDNalertSystemFQDN
Object ID
1.3.6.1.4.1.674.10892.4.5000.10.8
Description
Specifies fully qualified domain name of the system generating
the alert.
Syntax
DisplayString
Table 9. Service Tag
Variable Name
alertServiceTagalertServiceTag
Object ID
1.3.6.1.4.1.674.10892.4.5000.10.9
Description
Specifies the system service tag of the system generating the
alert.
Syntax
DisplayString
Table 10. Chassis Service
Tag
Variable Name
alertChassisServiceTagalertChassisServiceTag
Object ID
1.3.6.1.4.1.674.10892.4.5000.10.10
Description
Specifies the chassis service tag of the system generating
the alert.
Syntax
DisplayString
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\