Dell Precision 7920 Tower Owner's Manual

Installing the memory module

1. Align the notch on the memory module with the tab on the memory module connector.
2. Insert the memory module into the memory module slot.
3. Press the memory module firmly until the retention tabs click into place.
   NOTE:Do not pull the retention levers up. Always press down firmly on the module until the levers lock into place unassisted.

   CAUTION:To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components or metallic contacts on the memory module as electrostatic discharge(ESD) can inflict severe damage on the components. To read more about ESD protection, see ESD protection.
4. Install the:
   1. air shroud
   2. side cover
5. Follow the procedure in After working inside your computer