跳转至主要内容
  • 快速、轻松地下订单
  • 查看订单并跟踪您的发货状态
  • 创建并访问您的产品列表
  • 使用“Company Administration”(公司管理),管理Dell EMC站点、产品和产品级联系人。

Dell Latitude E7240 Owner's Manual

Removing the Display Assembly

  1. Follow the procedures in Before Working Inside Your Computer .
  2. Remove:
    1. battery
    2. SD card
    3. base cover
    4. keyboard
    5. palmrest
  3. Perform the following steps as shown in the illustration:
    1. Disconnect the WLAN cable from the system board [1].
    2. Unroute the WLAN cables from the slot [2].
    3. Remove the screw that secures the heatsink to the computer.
  4. Perform the following steps as shown in the illustration: Disconnect the antenna cables from the wireless solution.
    1. Disconnect the LVDS cable from the system board [1].
    2. Unroute the cable from the slot [2].
    3. Remove the screws and pull the antenna cables from the holes on the base chassis that secure the display assembly to the computer.
    Figure displays disconnect of LVDS cable and removal of secure from the computer.
  5. Remove the screws that secure the display assembly to the computer and lift the display assembly from the computer.
    Figure displays removal display assembly from the computer.

对此内容评级

准确性
有用性
易理解性
这篇文章对您有帮助吗?
0/3000 characters
  请提供评级(1-5星)。
  请提供评级(1-5星)。
  请提供评级(1-5星)。
  请选择这篇文章是否有帮助。
  注释中不得包含以下特殊字符:<>()\