Removal
System Cover
Identify the system cover highlighted in blue.
Using a flat head or a Phillips screwdriver, rotate the lock counter clockwise.
Lift the latch till the system cover slides back.
Hold the cover on both sides, and lift the cover away from the system.
Graphics card
Identify the graphics card highlighted in blue
Press the blue tabs on both sides of the GPU air shroud to remove the top cover.
Lift the expansion card latch on rear of system.
Close the PCIe card holder latch on the GPU air shroud to release the GPU
Hold the GPU by its edges and slide out the GPU from the connector on the riser.
Flip the card over to access the power cable thumb latch.
Disconnect the power cable from the graphics card.
Install
Graphics card
Identify the graphics card location highlighted in blue.
Connect the power cable to the graphics card.
Align the connector on the GPU with the connector on the riser
Insert the GPU into the riser until it is fully seated.
Press the PCIe lock on the GPU air shroud to release the PCIe card holder latch to secure the card
Lock the expansion card latch on rear of system.
Install the top cover of the GPU air shroud
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the guide slots on the system.
Push the system cover latch down.
Using a flat head or Phillips screwdriver, rotate the lock clockwise.