Basket

Subtotal:
GBR
GBR

    FN IO Module for FX2 Chassis

    Call for Pricing: 0800 085 4878 Call for Pricing: 0800 085 4878

    No-fuss network integration

    Simplify FX2 cabling and enhance converged IO and Fibre Channel capabilities for the FX architecture with added full layer 2/3 switch mode.

    chat_callout Need help with your purchase? Call us at 0800 085 4878 or chat.

    Performance

    MAC addresses: 64K
    Switch fabric capacity: 240 Gbps (Full-Duplex)
    Forwarding capacity: 179 Mpps
    Link aggregation: Up to 12 members per group, 24 LAG groups with stack support
    In standalone mode, max 4 members per group and 1 uplink LAG group (Port-channel 128 default mode)
    In stacking mode: max of 12 members per group and 1 uplink LAG group (stacking mode with FN410S and FN410T)
    In PMUX mode: max of 24 LAG groups and multiple uplink LAG groups
    In full-switch mode: max of 24 LAG groups and multiple uplink LAG groups
    Line-rate Layer 2 switching: All protocols, including IPv4
    Line-rate Layer 3 routingi : IPv4 and IPv6
    Packet buffer memory: 4MB
    CPU memory: 2GB
    ACLs ingress egress in full switch mode

    Stacking Attributes

    Stacked units: Up to 6 IOAs (using 10GbE ports deployed via CLI)
    Stacking bandwidth: Up to 40Gbps (using 1 x 10GbE ring)
    Stacking topology: Ring and daisy chain
    Virtual Link Trunking (VLT): mVLT and L2 over VLT (deployed via CLI)
    VLT supported in VLT, PMUX and Full-switch mode.
    Stacking supported in stacking, PMUX and Full-switch mode with FN410S and FN410T.

    Routing

    Layer 3 Routing - full switch mode:
    1058 RIPv1
    2453 RIPv2
    2154 MD5 (OSPF)
    1587 NSSA (OSPF)
    2328 OSPFv2
    2740 OSPFv3
    4222 Prioritization and congestion avoidance
    4552 OSPFv3 IPsec authentication

    BGP:
    1997 BGP Communities
    2385 BGP MD5
    2439 BGP Route Flap Damping
    2796 BGP Route Reflection
    2918 BGP Route Refresh
    3065 BGP Confederations
    4360 BGP Extended Communities
    4893 BGP 4-byte ASN
    5396 BGP 4-byte ASN representations
    draft-ietf-idr-restart-06 BG P Graceful Restart
    1195 Routing IPv4 with IS-IS
    5308 Routing IPv6 with IS-IS

    Management

    1155 SMIv1i
    1156 Internet MIBi
    1157 SNMPv1
    1212 Concise MIB Definitionsi
    1215 SNMP Trapsi
    1493 Bridges MIBi
    1850 OSPFv2 MIBi
    1901 Community-based SNMPv2
    2011 IP MIBi
    2012 TCP MIBi
    2013 UDP MIBi
    2096 IP Forwarding Table MIBi
    2570 SNMPv3i
    2571 Management Frameworksi
    2572 Message Processing and Dispatchingi
    2575 SNMPv3 VACMi
    2576 Coexistence Between SNMPv1/v2/v3
    2578 SMIv2i
    2579 Textual Conventions for SMIv2i
    2580 Conformance Statements for SMIv2i
    2618 RADIUS Authentication MIBi
    2665 Ethernet-like Interfaces MIBi
    2787 VRRP MIB 2819 RMON MIB (groups 1, 2, 3, 9)i
    2863 Interfaces MIBi
    3273 RMON High Capacity MIBi
    3416 SNMPv2
    3418 SNMP MIB
    3434 RMON High Capacity Alarm MIBi
    ANSI/TIA-1057 LLDP-MED MIBi
    IEEE 802.1AB LLDP MIBi
    IEEE 802.1AB LLDP DOT1 MIBi
    IEEE 802.1AB LLDP DOT3 MIBi
    sFlow.org sFlowv5i
    FORCE10-IF-EXTENSION-MIB
    FORCE10-LINKAGG-MIBi
    FORCE10-COPY-CONFIG-MIBi
    FORCE10-MON-MIBi
    FORCE10-PRODUCTS-MIBi
    FORCE10-MS-CHASSIS-MIBi
    FORCE10-SMI FORCE10-SYSTEM-COMPONEN-MIBi
    FORCE10-TC-MIBi
    FORCE10-TRAP-ALARM-MIBi
    FORCE10-FIPSNOOPING-MIB
    FORCE10-DCB-MIBi
    LLDP-EXT-DOT1-DCBX-MIBi
    IEEE8021-PFC-MIBi
    DELLl_ITA.REV_1_1.MIB
    F10-JUMPSTART-MIBi
    FORCE10-MSTP-MIB
    F10-FPSTATS.MIB
    f10-VirtualLinkTrunk.MIB
    F10-DCBX.MIB
    F10-MS-PLATFORM.MIB

    VLAN

    802.1Q VLAN tagging
    802.3ac frame extensions for VLAN tagging
    Native VLAN
    802.1D Bridging, STPi
    802.1s MSTPi
    802.1w RSTPi
    Force10 PVST+i
    2338 VRRPi

    Multicast

    4541 IGMPv1/v2 Snooping
    1112 IGMPv1i
    3569 SSM for IPv4i
    2236 IGMPv2i
    4541 IGMPv1/v2 Snooping
    3376 IGMPv3 draft-ietf-pim-sm-v2-new-05 PIM-SMi

    IEEE Compliance

    802.1AB LLDP
    802.1p L2 Prioritization
    802.3ab Gigabit Ethernet (1000Base-T)
    802.3ad Link Aggregation with LACP
    802.3ae 10GbE (10GBase-X)
    802.3u Fast Ethernet (100Base-TX)
    802.3x Flow Control
    802.3z Gigabit Ethernet (1000Base-X)
    ANSI/TIA-1057 LLDP-MED
    MTU 12KB

    Environmental

    Power supply: 100–240V AC 50/60Hz
    Max. thermal output: 955.36 BTU/h
    Max. current draw per system: 2A at 100/120V AC, 1A at 200/240V AC
    Max. power consumption: 123 Watts
    ISO 7779 A-weighted sound pressure level: 59.6dBA at 73.4°F (23°C)
    Operating temperature: 32° to 140°F (0° to 60°C)
    Operating humidity: 10 to 85% (RH), non-condensing
    Max. non-operating specifications: Storage temperature: –40° to 158°F (–40° to 70°C)
    Storage humidity: 5 to 95% (RH), non-condensing

    UL/CSA 60950-1, Second Edition
    EN 60950-1, Second Edition
    IEC 60950-1, Second Edition Including all National
    Deviations and Group Differences
    EN 60825-1 Safety of Laser Products Part 1: Equipment Classification Requirements and User’s Guide Optical Fibre Communication Systems
    FDA Regulation 21 CFR 1040.10 and 1040.11 Emissions
    Australia/New Zealand: AS/NZS CISPR 22: 2006, Class A
    Canada: ICES-003, Issue-4, Class A
    Europe: EN 55022: 2006+A1:2007 (CISPR 22: 2006), Class A
    Japan: VCCI V3/2009 Class A
    USA: FCC CFR 47 Part 15, Subpart B:2009, Class A
    EN 300 386 V1.4.1:2008 EMC for Network Equipment
    EN 55024: 1998 + A1: 2001 + A2: 2003
    EN 61000-3-2: Harmonic Current Emissions
    EN 61000-3-3: Voltage Fluctuations and Flicker
    EN 61000-4-2: ESD
    EN 61000-4-3: Radiated Immunity
    EN 61000-4-4: EFT
    EN 61000-4-5: Surge
    EN 61000-4-6: Low Frequency Conducted Immunity
    All components are RoHS compliant.

    FN IO Module for FX2 Chassis - Reduce cable complexity

    Reduce cable complexity

    The FN IO Module (FN IOM) is designed specifically for the PowerEdge FX2 converged-infrastructure chassis, part of the PowerEdge FX architecture. Supporting up to two FN IOMs per chassis, the FX2 converged infrastructure also includes up to 8 x 10GbE internal ports, plus redundant cooling fans and power supplies.

    The FN IOM can simplify FX2 connectivity by as much as 8-to-1, greatly reducing cabling complexity. Plug-and-play convenience with zero-touch and preconfigured features enables layer 2 control. This allows fast, easy network deployment using the Dell Blade IO Manager, with additional management of the FN IOM through a CLI using the Dell Networking OS 9, enabling full layer 3 switching functions.
    FN IO Module for FX2 Chassis - Operate with dual mode capability

    Operate with dual mode capability*

    The FN IO Module has the ability to operate in two separate modes.

    • Plug-and-play mode designed for administrators to configure the FN IOM without having to configure networking settings. The device is managed through the Dell Blade IO Manager’s simple GUI interface.
    • Full switch mode, enabling layer 3 switch functions. This allows Dell OS 9 command line interface control, including routing protocols, multicast features, access control lists, IPv4 and IPv6 support, and OpenFlow capabilities for software-defined networking.
    FN IO Module for FX2 Chassis - Optimize FX2 performance

    Optimize FX2 performance

    Enhance east-west traffic flows within the FX2 enclosure for superior network performance. The FN IO Module takes full advantage of high-performance 10GbE throughput and the next-generation of PowerEdge servers, letting you easily connect to high-density network architectures.

    In addition to the eight 10GbE internal ports, the FN IOM supports uplink-port link aggregation group (LAG) and virtual link trunking (VLT).


    Simplify converged IO and Fibre Channel connectivity

    Choose the right module for your environment and simplify connectivity with your choice of external port configurations.

    • SFP+ (FN410s): Connect over long distances and minimize latency via optics with 4 x 10GbE SFP+ ports.
    • 10GBASE-T (FN410t): Support cost-effective copper media up to 100 meters with 4 x 10GBASE-T ports.
    • FC/SFP+ combination (FN2210s): Enable convergence directly within the FX2 enclosure, while reducing cabling and adapters, with a combination of two 2/4/8Gbps Fibre Channel ports* plus two 10GbE SFP+ ports(up to four 10GbE SFP+ ports with reboot).

     

    FN IO Module for FX2 Chassis - Enable and ease LAN/SAN convergence

    Enable and ease LAN/SAN convergence

    Full data center bridging (DCB) support with zero-touch converged IO activation enable an automated LAN/SAN converged system that connects server nodes to upstream switches. The solution can:

     • Reduce cabling up to 75 percent
     • Remove up to 50 percent of your existing LAN/SAN adapters
     • Decrease upstream top-of-rack (ToR) ports by up to 75 percent

    In addition, the FN IOM easily connects to the Dell Networking S5000 10/40GbE Switch that features up to 64 SFP+ ports and up to 12 Fibre Channel ports with full Fibre Channel fabric services support

     


    FN410s 4-port SFP+ IO Module

    FN410s 4-port SFP+ IO Module

    • 4 ports of SFP+ 10GbE connectivity
    • Supports optical and DAC cable media
    FN410t 4-port 10GBASE-T IO Module

    FN410t 4-port 10GBASE-T IO Module

     

    • 4 ports of 10GBASE-T connectivity
    • Supports cost-effective copper media up to 100 meters
    FN2210s 4-port Combination Fibre Channel/Ethernet IO Module

    FN2210s 4-port Combination Fibre Channel/Ethernet IO Module

     

    • Up to 2 ports of 2/4/8Gbps Fibre Channel* plus 2 ports ofSFP+10GbE
    • Up to 4 ports SFP+ 10GbE (with reboot)
    • NPG fiber channel and full fiber channel fabric services
    • capabilities

    Navigate network complexity with Dell EMC Services

    Our global team of network experts understands the complexities of IT ecosystems, including multi-vendor environments. We have the skillset and experience to not only quickly resolve performance issues but also transform your network to meet the demands of your business.
    Consulting
    Consulting
    Dell EMC network consultants provide expert guidance to help you optimize and transform the network environment for the demands of today’s multi-cloud infrastructures. Our deep infrastructure and application expertise combined with sophisticated network analysis toolsets address a wide range of network technology and process challenges.
    Deployment
    Deployment
    Leverage the Dell EMC ProDeploy Enterprise Suite to get your network installed and configured. Our experts can free your IT staff to focus on your core business, minimize downtime and give you the confidence that the job will be done right, the first time.
    Support
    Support
    Gain access to ProSupport technical experts who can assist with your most complex networking challenges. The Dell EMC ProSupport Enterprise Suite provides networking support around the clock and around the globe, helping your team maintain a high level of productivity.
    Education
    Education
    Dell EMC offers flexible training programs so your staff can build the right skills to successfully manage and utilize your network to its full potential. Through our personalized approach, your staff gets the exact training they need to improve productivity and adoption, decrease downtime, and reduce end-user support calls.
    Drivers, Manuals & Support

    Dell Support

    From drivers and manuals to diagnostic tools and replacement parts, Dell Product Support has you covered!

    Intel® Xeon® Scalable Processors

    Compare

    Compare Products ()

    Add the products you would like to compare, and quickly determine which is best for your needs.
    Add the products you would like to compare, and quickly determine which is best for your needs.