Dell Command | Monitor

Dell Command | Monitor



Important Notes

Note: Dell Command | Monitor 10.0 (Windows) or later requires platforms supporting WMI-ACPI BIOS. The complete functionalities of Dell Command | Monitor is available for the supported platforms, refer the Supported Platforms for more information.
Note: This application has not been validated for Red Hat Enterprise Linux (RHEL) systems with the FIPS (Federal Information Processing Standards) boot option enabled in grub.
Note: Ensure SMM Security Mitigation BIOS Feature is Disabled on applicable platforms running Linux operating systems. Dell Command | Monitor on Linux operating systems will not work as intended if SMM Security Mitigation BIOS feature is Enabled.
Note: Dell Command | Monitor was formerly Dell OpenManage Client Instrumentation (OMCI). After the OMCI version 8.2.1, OMCI is rebranded as Dell Command | Monitor.

Dell Command | Monitor


The Dell Command | Monitor software application enables IT administrators to easily manage fleet inventory, monitor system health, modify BIOS settings, and remotely collect information for deployed Dell client systems. Active system health state monitoring can help reduce the total cost of system ownership and is part of a holistic approach to managing all networked devices.

Dell Command | Monitor interfaces with leading enterprise management consoles that support industry standards. This approach helps to ensure that Dell systems can be managed by a broad array of existing enterprise management tools. It also interfaces with the Dell Integration Suite for System Center 2012, Dell KACE K1000 Management Appliance, Dell OpenManage Essentials and our Client Management Pack for System Center Operations Manager (SCOM). Finally, tight integration with Windows Management Instrumentation (WMI) allows customers to take advantage of the rich scripting capabilities for collecting information and customizing system settings. This product is provided at no additional charge to Dell customers.

The latest version of Dell Command | Monitor is v10.3.



Downloads

Dell Command | Monitor v10.3 (Released 4/2020)


Dell Command | Monitor Quick Links

Installing Dell Command | Monitor manually is pretty simple. Just download the latest version (links above) and install with administrative rights.

To perform an unattended installation to be used with your favorite software distribution tool, perform the following steps:

  • Download the latest version of Dell Command | Monitor (links above).
  • Launch the executable with the following parameters:
Systems-Management_Application_XXXXX_WIN32_ _ .EXE /s



Videos





Previous Releases


Dell Command | Monitor v10.2.1


Dell Command | Monitor v10.2 (Released - 04/2019)


Dell Command | Monitor v10.0 (Released - 04/2018)


Dell Command | Monitor v9.3 (Released - 08/2017)


Sample Scripts

Check if a BIOS password is set





Article ID: SLN311855

Last Date Modified: 04/12/2020 07:45 PM


Rate this article

Accurate
Useful
Easy to understand
Was this article helpful?
Yes No
Send us feedback
Comments cannot contain these special characters: <>()\
Sorry, our feedback system is currently down. Please try again later.

Thank you for your feedback.