NVP-vProxy: FLR-herstel mislukt met de foutmelding "Unable to get partition information: exit status 2"

Summary: VM File Level Restore (FLR) mislukt tijdens koppelingsbewerking met fout: "Unable to get partition information: exit status 2"

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

  • Op de virtuele machine (VM) waarvoor FLR werd uitgevoerd, werd een harde schijf toegevoegd die niet gepartitioneerd was.
  • De beveiligingsintegratie van NetWorker VMware is geconfigureerd met het vProxy-apparaat.
  • NetWorker 19.7.0.x (vProxy 4.3.0-22) en eerder.
  • Een VIRTUAL Machine (VM) FLR-herstel wordt uitgevoerd in de omgeving en mislukt met de onderstaande fout:
 
Ontkoppelen na koppelingsfout: Kan geen partitie-informatie ophalen: exit status 2
  
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:38 TRACE:  [@(#) Build number: 246] /dev/loop0
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:38 TRACE:  [@(#) Build number: 246] ====End of output from '/sbin/losetup'.
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:40 TRACE:  [@(#) Build number: 246] ====Executing [/sbin/blkid -c /dev/null /dev/loop0]
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:40 TRACE:  [@(#) Build number: 246] /dev/loop0: PTUUID="00041d0c" PTTYPE="dos"
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:40 TRACE:  [@(#) Build number: 246] ====End of output from '/sbin/blkid'.
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:40 TRACE:  [@(#) Build number: 246] Attached VMDK 'vm-422-disk-key-2000-flat.vmdk' at '/dev/loop0' with partitions [/dev/loop0p3 /dev/loop0p2 /dev/loop0p1]
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:40 TRACE:  [@(#) Build number: 246] ====Executing [/sbin/losetup --find --show -P /opt/emc/vproxy/runtime/state/flr/temp/nfs-905033c8-d093-46c7-a8b3-ea9722b76eeb/vm-422-disk-key-2001-flat.vmdk]
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:40 TRACE:  [@(#) Build number: 246] /dev/loop2
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:40 TRACE:  [@(#) Build number: 246] ====End of output from '/sbin/losetup'.
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:42 TRACE:  [@(#) Build number: 246] ====Executing [/sbin/blkid -c /dev/null /dev/loop2]
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:42 TRACE:  [@(#) Build number: 246] ====Executing [/sbin/losetup -d /dev/loop2]
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:44 TRACE:  [@(#) Build number: 246] ====Executing [/sbin/losetup --find --show -P /opt/emc/vproxy/runtime/state/flr/temp/nfs-905033c8-d093-46c7-a8b3-ea9722b76eeb/vm-422-disk-key-2001-flat.vmdk]
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:44 TRACE:  [@(#) Build number: 246] /dev/loop2
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:44 TRACE:  [@(#) Build number: 246] ====End of output from '/sbin/losetup'.
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:46 TRACE:  [@(#) Build number: 246] ====Executing [/sbin/blkid -c /dev/null /dev/loop2]
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:46 TRACE:  [@(#) Build number: 246] Removing 1 temporary loop devices
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:46 TRACE:  [@(#) Build number: 246] ====Executing [/sbin/losetup -d /dev/loop0]
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:46 TRACE:  [@(#) Build number: 246] ====Executing [/sbin/pvscan --cache]
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:46 TRACE:  [@(#) Build number: 246] File descriptor 10 (socket:[4601043]) leaked on pvscan invocation. Parent PID 2560: /opt/emc/vproxy/bin/vflrd
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:46 TRACE:  [@(#) Build number: 246]   /dev/loop1: read failed after 0 of 4096 at 10737352704: Input/output error
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:46 TRACE:  [@(#) Build number: 246]   /dev/loop1: read failed after 0 of 4096 at 10737410048: Input/output error
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:46 TRACE:  [@(#) Build number: 246]   /dev/loop1: read failed after 0 of 4096 at 0: Input/output error
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:46 TRACE:  [@(#) Build number: 246]   /dev/loop1: read failed after 0 of 4096 at 4096: Input/output error
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:46 TRACE:  [@(#) Build number: 246] ====End of output from '/sbin/pvscan'.
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:46 ERROR:  [@(#) Build number: 246] Unable to unmount '/opt/emc/vproxy/runtime/state/flr/temp/nfs-905033c8-d093-46c7-a8b3-ea9722b76eeb': device or resource busy
159373:nsrvproxy_flr: vProxy Log: 2019/01/08 14:56:46 INFO:   [@(#) Build number: 246] Unmounting after mount failure: Unable to get partition information: exit status 2

Cause

Op de VM is een niet-gepartitioneerde/geformatteerde schijf aangesloten.

Besturingssysteemopdrachten kunnen worden gebruikt om de niet-geformatteerde schijf te controleren:
  • fdisk -l
  • bestand -sL /dev/sd*
  • lsblk
  • blkid
<VM_Name>:~ # fdisk -l
Disk /dev/sdb: 10 GiB, 10737418240 bytes, 20971520 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk /dev/sda: 30 GiB, 32212254720 bytes, 62914560 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00041d0c

Device     Boot    Start      End  Sectors Size Id Type
/dev/sda1           2048  4208639  4206592   2G 82 Linux swap / Solaris
/dev/sda2  *     4208640 29382655 25174016  12G 83 Linux
/dev/sda3       29382656 62914559 33531904  16G 83 Linux

<VM_Name>:~ #  file -sL /dev/sd*
/dev/sda:  DOS/MBR boot sector
/dev/sda1: Linux/i386 swap file (new style), version 1 (4K pages), size 525823 pages, no label, UUID=0ce67b73-cf94-4511-84f6-572201fd8491
/dev/sda2: DOS/MBR boot sector
/dev/sda3: SGI XFS filesystem data (blksz 4096, inosz 512, v2 dirs)
/dev/sdb:  data

<VM_Name>:~ # lsblk
NAME            MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda               8:0    0   16G  0 disk
├─sda1            8:1    0    1G  0 part /boot
└─sda2            8:2    0   15G  0 part
  ├─centos-root 253:0    0 13.4G  0 lvm  /
  └─centos-swap 253:1    0  1.6G  0 lvm  [SWAP]
sdb               8:16   0    1G  0 disk
sr0              11:0    1 1024M  0 rom

<VM_Name>:~ # blkid
/dev/sda1: UUID="0ce67b73-cf94-4511-84f6-572201fd8491" TYPE="swap" PARTUUID="00041d0c-01"
/dev/sda2: UUID="8375d6ba-626d-43ef-a881-82230d4b84a5" UUID_SUB="b333cada-c2fe-48aa-8a24-f6f839a0c46a" TYPE="btrfs" PTTYPE="dos" PARTUUID="00041d0c-02"
/dev/sda3: UUID="6514e3e9-5bea-467f-8f73-479a71380753" TYPE="xfs" PARTUUID="00041d0c-03"
/dev/sr0: UUID="2017-07-12-03-04-39-00" LABEL="SLE-12-SP3-Server-DVD-x86_640473" TYPE="iso9660" PTUUID="1285b34e" PTTYPE="dos"
Uit de bovenstaande opdrachten kunnen we zien dat een apparaat (/dev/sdb) is aangesloten op de VM, maar geen opmaak, partitie of data heeft.

Resolution

Oplossing:

Er is een codecorrectie uitgebracht om de niet-geformatteerde schijf over te slaan.

NetWorker documentatie en downloads zijn beschikbaar via: https://www.dell.com/support/home/product-support/product/networker/

When performing the FLR, it reports that its skipping an unformatted disk:
image.png


Tijdelijke oplossing:

Voer vóór NetWorker 19.7.x en vProxy 4.3.0-29 een Instant Recovery van de VM uit. Hierdoor wordt een tijdelijke (offline) kopie van de VM op het Data Domain-systeem gemaakt. De benodigde schijven kunnen NFS worden gekoppeld aan de bron-VM (online) en worden gekopieerd van het VM-besturingssysteem. Dit proces wordt beschreven onder: https://www.dell.com/support/kbdoc/000158482

 

Affected Products

NetWorker

Products

NetWorker Family, NetWorker, NetWorker Series
Article Properties
Article Number: 000056216
Article Type: Solution
Last Modified: 17 Mar 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.