GDDR: GDDM441E CGRPQDEV fout opgetreden - functiecode 5, NAAM CONGROUP, RC 8, RS 8 (APPARAAT NIET GEVONDEN) en RC 8, RS 13 (CONGROUP NAME NOT FOUND).
Summary: Misleidende RS als consistentiegroep niet wordt uitgevoerd.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Wanneer consistentiegroep niet wordt uitgevoerd, kunnen de secundaire redencodes, bijvoorbeeld 8 (apparaat niet gevonden) of 13 (naam congroup niet gevonden) worden geretourneerd.
Deze RS-codes zijn misleidend.
Deze RS-codes zijn misleidend.
Cause
Dit wordt veroorzaakt door een softwareprobleem.
Resolution
De berichtverwerking is verbeterd om een RS 6 uit te geven in omstandigheden waarin geen consistentiegroep wordt gevonden:
GDDM441E CGRPQDEV-fout opgetreden - functiecode 5, ConGroup-naam, RC 8, RS 6 (CG niet actief)
Permanente oplossing:
GDDM441E CGRPQDEV-fout opgetreden - functiecode 5, ConGroup-naam, RC 8, RS 6 (CG niet actief)
Permanente oplossing:
- Voor Mainframe Enablers 8.5 is PTF SF85101 ontwikkeld om het probleem te verhelpen. Het is beschikbaar om te downloaden van Dell Online Support.
- Voor Mainframe Enablers 8.4 is PTF SF84168 ontwikkeld om het probleem te verhelpen. Het is beschikbaar om te downloaden van Dell Online Support.
Additional Information
OPMERKING PTF-afdekplaat:
++PTF(SF85101) REWORK(2022027) . ++VER(Z038) FMID(SSCF850) PRE( SF85089 ) /* *------------------------------------------------------------- * PROBLEM DESCRIPTION(S): * ------------------------------------------------------------ * USERS AFFECTED: AutoSwap Users * PROBLEM DESCRIPTION: Misleading RS if ConGroup not running * DESCRIPTION DETAIL: * * If ConGroup is not running, then secondary reason codes like * 8 (device not found) or 13 (congroup name not found) should * not be returned if ConGroup is not running. Reason code 6 * should be returned instead. * * PROBLEM RESOLUTION: * * Return RS 6 if no ConGroup * * MODULES: CGRPQDEV * * ------------------------------------------------------------ * USERS AFFECTED: MSC Users * PROBLEM DESCRIPTION: MSC receiving incorrect information * DESCRIPTION DETAIL: * * In some cases (when more than one ConGroup address space is * running on an LPAR), MSC may receive incorrect information * about the status of a group (false inactive). This can * happen if a 10.0 version is running along side a pre-10.0 * version. * * PROBLEM RESOLUTION: * * Correct CGRPQDEV to return correct group status information * regardless of CG version or CGSET being used. * * MODULES: CGRPQDEV * * ------------------------------------------------------------ * SF85101 27 Jan 2022 14:45:20 * ------------------------------------------------------------
Affected Products
Mainframe EnablersArticle Properties
Article Number: 000196935
Article Type: Solution
Last Modified: 16 Jun 2023
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.