Isilon: Node Firmware versions show in firmware status list
Sommaire: When 'isi upgrade cluster firmware devices' is run, the firmware version columns for all components in the cluster show instead of the installed and desired firmware versions.
Cet article s’applique à
Cet article ne s’applique pas à
Cet article n’est lié à aucun produit spécifique.
Toutes les versions de produits ne sont pas identifiées dans cet article.
Symptômes
When 'isi upgrade cluster firmware devices' is run, the firmware version columns for all components in the cluster show <Unknown> <Unknown> instead of the installed and desired firmware versions.
Cause
This is caused by incompatibility between the installed firmware package and the OneFS version it is installed on. There are currently two active branches of Node Firmware Package: the 10.x branch, which is compatible with OneFS 8.x, and the 11.x branch, which is compatible with OneFS 9.x. Installing the wrong branch on a OneFS version it is not compatible with will cause this issue to appear.
Résolution
First off, determine whether the wrong Node Firmware Package for your OneFS version is installed. If so, uninstall it. Then:
- If the cluster to be updated is running OneFS 8.x, install the latest NFP 10.x version.
- If the cluster to be updated is running OneFS 9.x, install the latest NFP 11.x version.
Produits touchés
Isilon, Isilon A100, Isilon A2000, Isilon F800, Isilon F810, Isilon Gen6.5, Isilon Gen6, Isilon H400, Isilon H500, Isilon H5600, Isilon H600, Isilon HD400, Isilon S210, Isilon X210, Isilon X410, PowerScale Archive A300, PowerScale Archive A3000
, PowerScale F200, PowerScale F600, PowerScale F900, PowerScale Hybrid H700, PowerScale Hybrid H7000
...
Propriétés de l’article
Numéro d’article: 000192587
Type d’article: Solution
Dernière modification: 26 mars 2026
Version: 3
Obtenez des réponses à vos questions auprès d’autre utilisateurs de Dell
Services de soutien
Vérifiez si votre appareil est couvert par les services de soutien.