Dell Unity: Unisphere UI fails to log in as LDAP User when TLS1.0 is disabled with message "The logged in user is not authorized to access Unisphere" (Dell Correctable)
概要: Unisphere UI fails to log in as LDAP User when TLS1.0 is disabled with message "The logged in user is not authorized to access Unisphere."
この記事は次に適用されます：
この記事は次には適用されません：
この記事は、特定の製品に関連付けられていません。
すべての製品パージョンがこの記事に記載されているわけではありません。
現象
Unity OE upgraded to version 4.3.
LDAP Server protocol is changed to block TLSv1.
Issue:
LDAP Users are unable to log in to Unisphere UI (Not a configuration issue as the users were working before).
The same user can successfully run commands using uemcli. Only using Unisphere UI, does this user fail to log in.
Example:
LDAP Server protocol is changed to block TLSv1.
Issue:
LDAP Users are unable to log in to Unisphere UI (Not a configuration issue as the users were working before).
Figure 1: LDAP User Unauthorized User Error Message
The same user can successfully run commands using uemcli. Only using Unisphere UI, does this user fail to log in.
Example:
uemcli -d array_name_or_ip -u LDAP.com/user100 -securepassword /stor/prov/luns/lun show
原因
LDAP Server only has TLS1.2 enabled. TLS1.0 and TLS1.1 are disabled.
Support for TLS1.2 is only supported with Unity versions 4.3 and later. If the Unity OE is 4.2.x or earlier, this is normal behavior.
A fresh install or re-Initialization of 4.3 does not have this issue.
Support for TLS1.2 is only supported with Unity versions 4.3 and later. If the Unity OE is 4.2.x or earlier, this is normal behavior.
NOTE: If Unity OE code is upgraded from 4.2.x or earlier, it fails to update one important file. This causes the Unisphere UI to still attempt to use TLSv1.0 (even if it is disabled or enabled in the Unity Security).
A fresh install or re-Initialization of 4.3 does not have this issue.
解決方法
If the Unity OE is 4.2.x or earlier, support for TLS1.2 is not available until Unity OE is upgraded to version 4.3.
If the Unity OE is 4.3.0.x, contact Dell Support and quote this KB for manually updating the required file (No impact to production).
If the Unity OE is 4.3.0.x, contact Dell Support and quote this KB for manually updating the required file (No impact to production).
対象製品
Dell EMC Unity Family製品
Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F
, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid, Dell EMC UnityVSA Professional Edition/Unity Cloud Edition
...
文書のプロパティ
文書番号: 000035540
文書の種類: Solution
最終更新: 27 4月 2023
バージョン: 3
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。