Μετάβαση στο κύριο περιεχόμενο
Έξοδος

Καλώς ορίσατε στην Dell

Ο λογαριασμός μου
  • Υποβάλετε παραγγελίες γρήγορα και εύκολα
  • Δείτε τις παραγγελίες και παρακολουθήστε την κατάσταση αποστολής
  • Δημιουργήστε μια λίστα με τα προϊόντα σας για να έχετε πρόσβαση σε αυτή
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Είσοδος Δημιουργήστε έναν λογαριασμό Είσοδος στο Premier Είσοδος στο Πρόγραμμα συνεργατών
Επικοινωνία

Dell PowerVault MD3060e Storage Enclosure Owner's Manual

PDF

Removing A Cooling Fan Module

  • CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  • CAUTION: The cooling fans are hot-swappable. To maintain proper cooling while the system is on, replace only one fan at a time.
  • NOTE: The procedure for removing each cooling fan module is identical.
Make sure that the Service action allowed indicator lights blue before you remove the cooling fan module. For more information, see Cooling Fan Module LED Indicator Codes .
  • NOTE: The Service action allowed indicator LED is not used in server attached configurations.
  1. Identify and locate the failed cooling fan module.
    • CAUTION: Remove the cooling fan module from the system only if the Service action allowed indicator lights blue. Removing the cooling fan module from the system when the Service action allowed indicator is off may damage the system.
    • NOTE: The Service action allowed indicator LED is not used in server attached configurations.
  2. Press the cooling fan module release latch to release the cooling fan module handle.
  3. Rotate the cooling fan module handle away from the system, until the cooling fan module is released from the slot.
  4. Holding the cooling fan module release handle, pull the cooling fan module away from the chassis.
    Figure 1. Removing and Installing the Cooling Fan Module The figure shows removing and installing a cooling fan module.
    1. cooling fan module release latch
    2. cooling fan module handle
    3. cooling fan module

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\