Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

debug ip udp-helper

Enable UDP debug and display the debug information on a console.

Syntax

debug ip udp-helper

To disable debug information, use the no debug ip udp-helper command.

Defaults

Debug disabled.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell#debug ip udp-helper
                                             UDP helper debugging is on
                                             
                                             01:20:22: Pkt rcvd on Te 4/1 with IP DA (0xffffffff) will be sent on Te 4/2 Te 4/3
                                             Vlan 3
                                             
                                             01:44:54: Pkt rcvd on Te 5/1 is handed over for DHCP processing.

Related Commands

ip udp-broadcast-address — configures a UDP IP address for broadcast.

ip udp-helper udp-port — enables the UDP broadcast feature on an interface.

show ip udp-helper — displays the configured UDP helper(s) on all interfaces.