Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip management-route

View the IP addresses assigned to the Management interface.

Syntax

show ip management-route [all | connected | summary | static]

Parameters

all	(OPTIONAL) Enter the keyword `all` to view all IP addresses assigned to all Management interfaces on the switch.
connected	(OPTIONAL) Enter the keyword `connected` to view only routes directly connected to the Management interface.
summary	(OPTIONAL) Enter the keyword `summary` to view a table listing the number of active and non-active routes and their sources.
static	(OPTIONAL) Enter the keyword `static` to view non-active routes also.

Command Modes

EXEC
EXEC Privilege

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Example

Dell#show ip management-route
                                             Destination    Gateway                 State
                                             -----------    -------                 -----
                                             10.1.2.0/24    ManagementEthernet 0/0  Connected
                                             172.16.1.0/24   10.1.2.4               Active
                                             Dell#