Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show acl-vlan-group detail

Display all the ACL VLAN Groups or display a specific ACL VLAN Group by name. To display the names in their entirety, the output displays in a line-by-line format.

Syntax

show acl-vlan-group detail

Parameters

detail

Display information in a line-by-line format to display the names in their entirety.

Without the detail option, the output is displayed in a table style and information may be truncated.

Default

No default behavior or values

Command Modes

EXEC

EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.3(0.0)	Introduced on the MXL 10/40GbE Switch IO Module platform.

Usage Information

The output for this command displays in a line-by-line format. This allows the ACL-VLAN-Group names (or the Access List Group Names) to display in their entirety.

Examples

The following sample output shows the line-by-line style display when using the show acl-vlan-group detail option. Note that no group or access list names are truncated

Dell#show acl-vlan-group detail 
                                             
                                             Group Name :
                                             Test
                                             Egress IP Acl :
                                             -
                                             Ingress IP Acl :
                                             test
                                             Ingress IPV6 Acl :
                                             -
                                             Vlan Members :
                                             1-100