Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show io-aggregator isolated-networks

Display the VLANs that are configured to be part of an isolated network on an Aggregator.

Syntax

show io-aggregator isolated-networks

Parameters

`isolated-networks`	Specify an isolated network to be configured
`vlan vlan-range`	Enter the keyword vlan followed by the member VLANs using VLAN IDs (separated by commas), a range of VLAN IDs (separated by a hyphen), a single VLAN ID, or a combination. For example: VLAN IDs (comma-separated): 3, 4, 6. Range (hyphen-separated): 5-10. Combination: 3, 4, 5-10, 8.

Defaults

None

Command Modes

EXEC Privilege

Usage Information

This command is used to show the isolated-network feature status and the VLANs configured for this feature. Show running-config will save this command under io-aggregator.

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.5(0.0)	Supported on the FN I/O Aggregator.
9.5(0.0)	Supported on the M I/O Aggregator.

Example

Dell#show io-aggregator isolated-networks
                                             Isolated Network Enabled VLANs : 5-10