Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip protocols

View information on all routing protocols enabled and active on the switch.

Syntax

show ip protocols

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell#show ip protocols
                                             Routing Protocol is "bgp 1"
                                             Cluster Id is set to 20.20.20.3
                                             Router Id is set to 20.20.20.3
                                             Fast-external-fallover enabled
                                             Regular expression evaluation optimization enabled
                                             Capable of ROUTE_REFRESH
                                             For Address Family IPv4 Unicast
                                             BGP table version is 0, main routing table version 0
                                             Distance: external 20 internal 200 local 200
                                             Neighbor(s):
                                             Address : 20.20.20.2
                                             Filter-list in : foo
                                             Route-map in : foo
                                             Weight : 0
                                             Address : 5::6
                                             Weight : 0
                                             Dell#