Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip bgp cluster-list

View BGP neighbors in a specific cluster.

Syntax

show ip bgp [ ipv4 unicast] cluster-list [ cluster-id]

Parameters

ipv4 unicast	(OPTIONAL) Enter the keywords `ipv4 unicast` to view information only related to ipv4 unicast routes.
cluster-id	(OPTIONAL) Enter the cluster id in dotted decimal format. The range is 1 — 4294967295.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The following describes the show ip bgp cluster-list command shown in the following example.

Field	Description
Network	Displays the destination network prefix of each BGP route.
Next Hop	Displays the next hop address of the BGP router. If 0.0.0.0 is listed in this column, then local routes exist in the routing table.
Metric	Displays the BGP route’s metric, if assigned.
LocPrf	Displays the BGP LOCAL_PREF attribute for the route.
Weight	Displays the route’s weight.
Path	Lists all the ASs the route passed through to reach the destination network.

Example

Dell#show ip bgp cluster-list
                                             BGP table version is 64444683, local router ID is 120.1.1.1
                                             Status codes: s suppressed, d damped, h history, * valid, > best
                                             Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n
                                             - network
                                             Origin codes: i - IGP, e - EGP, ? - incomplete
                                             
                                             Network          Next Hop      Metric LocPrf Weight Path
                                             * I 10.10.10.1/32     192.68.16.1        0    100      0 i
                                             * I                   192.68.16.1        0    100      0 i
                                             *>I                   192.68.16.1        0    100      0 i
                                             * I                   192.68.16.1        0    100      0 i
                                             * I                   192.68.16.1        0    100      0 i
                                             * I                   192.68.16.1        0    100      0 i
                                             * I 10.19.75.5/32     192.68.16.1        0    100      0 ?
                                             * I                   192.68.16.1        0    100      0 ?
                                             *>I                   192.68.16.1        0    100      0 ?
                                             * I                   192.68.16.1        0    100      0 ?
                                             * I                   192.68.16.1        0    100      0 ?
                                             * I                   192.68.16.1        0    100      0 ?
                                             * I 10.30.1.0/24      192.68.16.1        0    100      0 ?
                                             * I                   192.68.16.1        0    100      0 ?
                                             *>I                   192.68.16.1        0    100      0 ?
                                             * I                   192.68.16.1        0    100      0 ?
                                             * I                   192.68.16.1        0    100      0 ?
                                             * I                   192.68.16.1        0    100      0 ?