Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In

Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

match

Match a sequence number to the transmission control protocol (TCP)/user datagram protocol (UDP) packets.

Syntax match seq-num {tcp | udp} { ipv6 | ip} port-num dest-ip dest-port-num

To remove the match filter for the crypto map, use the no match seq-num command.

Parameters
seq-num Enter the match command sequence number. The range is from 0 to 255.
tcp Enter the keyword tcp to configure a TCP access list filter.
udp Enter the keyword udp to configure a UDP access list filter.
ipv6 Enter the source IPv6 address.
ip Enter the source IPv4 address.
port-num Enter the source port number. The range is from 0 to 65535
dest-ip Enter the destination IP address.
dest-port-num Enter the destination port number. The range is from 0 to 65535.
Defaults none
Command Modes CONFIG-CRYPTO-POLICY
Supported Modes Full–Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information UDP is not supported. Only TCP 23 telnet and 21 FTP are supported.
Example 
Dell(conf-crypto-policy)#match 0 tcp a::1 /128 0 a::2 /128 23
                                             Dell(conf-crypto-policy)#match 1 tcp a::1 /128 23 a::2 /128 0
                                             Dell(conf-crypto-policy)#match 2 tcp a::1 /128 0 a::2 /128 21
                                             Dell(conf-crypto-policy)#match 3 tcp a::1 /128 21 a::2 /128 0
                                             Dell(conf-crypto-policy)#match 4 tcp 1.1.1.1 /32 0 1.1.1.2 /32 23
                                             Dell(conf-crypto-policy)#match 5 tcp 1.1.1.1 /32 23 1.1.1.2 /32 0
                                             Dell(conf-crypto-policy)#match 6 tcp 1.1.1.1 /32 0 1.1.1.2 /32 21
                                             Dell(conf-crypto-policy)#match 7 tcp 1.1.1.1 /32 21 1.1.1.2 /32 0

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\