Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show startup-config

Display the startup configuration.

Syntax

show startup-config

Command Modes

EXEC Privilege

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Example

Dell#show startup-config
                                             ! Version E8-3-16-29
                                             ! Last configuration change at Thu Apr 26 19:19:02 2012 by default
                                             ! Startup-config last updated at Thu Apr 26 19:19:04 2012 by default
                                             !
                                             boot system stack-unit 0 primary system: A:
                                             boot system stack-unit 0 secondary tftp://10.11.200.241/
                                             dt-m1000e-5-c2
                                             boot system gateway 10.11.209.254
                                             !
                                             redundancy auto-synchronize full
                                             redundancy disable-auto-reboot stack-unit
                                             !
                                             redundancy disable-auto-reboot stack-unit 0
                                             redundancy disable-auto-reboot stack-unit 1
                                             redundancy disable-auto-reboot stack-unit 2
                                             redundancy disable-auto-reboot stack-unit 3
                                             --More--

Related Commands

show running-config — displays the current (running) configuration.