Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show ip pim snooping tib

Display information from the tree information base (TIB) PIM-SM snooping discovered about multicast group members and states.

Syntax

show ip pim snooping tib [vlan vlan-id] [ group-address [ source-address]]

Parameters

vlan vlan-id	(OPTIONAL) Enter a VLAN ID to display TIB information PIM-SM snooping discovered on a specified VLAN. The valid VLAN IDs range is from 1 to 4094.
group-address	(OPTIONAL) Enter the group address in dotted decimal format (A.B.C.D) to display TIB information PIM-SM snooping discovered for a specified multicast group.
source-address	(OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D) to display TIB information PIM-SM snooping discovered for a specified multicast source.

Command Modes

EXEC
EXEC Privilege

Supported Modes

Full—Swtich

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The following describes the show ip pim snooping tib commands shown in the following example.

Field	Description
(S, G)	Displays the entry in the PIM multicast snooping database.
uptime	Displays the amount of time the entry has been in the PIM multicast route table.
expires	Displays the amount of time until the entry expires and is removed from the database.
RP	Displays the IP address of the RP/source for this entry.
flags	List the flags to define the entries: S = PIM Sparse Mode C = directly connected L = local to the multicast group P = route was pruned R = the forwarding entry is pointing toward the RP F = Dell Networking OS is registering this entry for a multicast source T = packets were received via Shortest Tree Path J = first packet from the last hop router is received and the entry is ready to switch to SPT K=acknowledge pending state
Incoming interface	Displays the reverse path forwarding (RPF) interface towards the RP/ source.
RPF neighbor	Displays the next hop from this interface towards the RP/source.
Outgoing interface list:	Lists the interfaces that meet one of the following criteria: a directly connect member of the Group statically configured member of the Group received a (*,G) Join message

Example

Dell#show ip pim snooping tib
                                             
                                             PIM Multicast Snooping Table
                                             Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
                                             SGR-P - (S,G,R) Prune
                                             Timers: Uptime/Expires
                                             * : Inherited port
                                             
                                             (*, 225.1.2.1), uptime 00:00:01, expires 00:02:59, RP 165.87.70.1, flags: J
                                             Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
                                             Outgoing interface list:
                                             TenGigabitEthernet 4/5 RPF 165.87.32.2 00:00:01/00:02:59
                                             TenGigabitEthernet 4/6 Upstream Port   -/-
                                             
                                             Dell#show ip pim snooping tib vlan 2 225.1.2.1 165.87.1.7
                                             
                                             PIM Multicast Snooping Table
                                             Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
                                             SGR-P - (S,G,R) Prune
                                             Timers: Uptime/Expires
                                             * : Inherited port
                                             
                                             (165.87.1.7, 225.1.2.1), uptime 00:00:08, expires 00:02:52, flags: j
                                             Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
                                             Outgoing interface list:
                                             TenGigabitEthernet 4/7 Upstream Port    -/-
                                             TenGigabitEthernet 4/6 DR Port          -/-
                                             TenGigabitEthernet 4/8 RPF 165.87.32.10 00:00:08/00:02:52