Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

renew dhcp interface

Re-acquire a dynamic IP address on an Ethernet interface enabled as a DHCP client.

Syntax

renew dhcp interface type slot/ port}

Parameters

interface type slot/port

Enter any of the following keywords and slot/port or number to clear counters from a specified interface:

For the management interface on the stack-unit, enter the keyword managementethernet followed by slot/port information. The slot and port range is 0.

For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.

Command Modes

EXEC Privilege

Supported Modes

All Modes

Default

None.

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Usage information

The renew dhcp command is used to renew the lease of IP address obtained through dhcp.

To display the currently configure dynamic IP address and lease time, enter the show ip dhcp lease command.