Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Baskets

iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

PDF

DellNICPortMetrics

Description

This resource represents the statistics of the NIC, NIC port, or partition.

URL

/redfish/v1/Dell/Systems/<ComputerSystem-Id>/NetworkAdapters/NetworkDeviceFunctions/DellNICPortMetrics/<NICPortMetrics-Id>

Supported HTTP Method and Privileges

HTTP Method Required Privilege
GET Login
The table below shows the supported properties of DellNICPortMetrics.
Property Type Read Only Description
DiscardedPkts INT Yes Indicates the total number of discarded packets.
FCCRCErrorCount INT Yes Indicates the number of FC frames with CRC errors.
FCOELinkFailures INT Yes Indicates the number of FCoE/FIP login failures.
FCOEPktRxCount INT Yes Indicates the number of good (FCS valid) packets received with the active FCoE MAC address of the partition.
FCOEPktTxCount INT Yes Indicates the number of good (FCS valid) packets transmitted that passed L2 filtering by a specific MAC address.
FCOERxPktDroppedCount INT Yes Indicates the number of receive packets with FCS errors.
FQDD String Yes A string that contains the Fully Qualified Device Description (FQDD), which is a user-friendly name for the object.
LanFCSRxErrors INT Yes Indicates the Lan FCS receive Errors.
LanUnicastPktRXCount INT Yes Indicates the total number of Lan Unicast Packets Received.
LanUnicastPktTXCount INT Yes Indicates the total number of Lan Unicast Packets Transmitted.
OSDriverState String Yes Indicates operating system driver states.
PartitionLinkStatus String Yes Indicates whether the partition link is up or down.
PartitionOSDriverState String Yes Indicates operating system driver states of the partitions.
RDMARxTotalBytes INT Yes Indicates the total number of RDMA bytes received.
RDMARxTotalPackets INT Yes Indicates the total number of RDMA packets received.
RDMATotalProtectionErrors INT Yes Indicates the total number of RDMA Protection errors.
RDMATotalProtocolErrors INT Yes Indicates the total number of RDMA Protocol errors.
RDMATxTotalBytes INT Yes Indicates the total number of RDMA bytes transmitted.
RDMATxTotalPackets INT Yes Indicates the total number of RDMA packets transmitted.
RDMATxTotalReadReqPkts INT Yes Indicates the total number of RDMA ReadRequest packets transmitted.
RDMATxTotalSendPkts INT Yes Indicates the total number of RDMA Send packets transmitted.
RDMATxTotalWritePkts INT Yes Indicates the total number of RDMA Write packets transmitted.
RXInputPowermW Number Yes Indicates the RX input power value of Small Form Factor pluggable (SFP) Transceiver.
RxBroadcast INT Yes Indicates the total number of good broadcast packets received.
RxBytes INT Yes Indicates the total number of bytes received, including host and remote management pass through traffic. Remote management passthrough traffic is applicable to LOMs only.
RxErrorPktAlignmentErrors INT Yes Indicates the total number of packets received with alignment errors.
RxErrorPktFCSErrors INT Yes Indicates the total number of packets received with FCS errors.
RxFalseCarrierDetection INT Yes Indicates the total number of false carrier errors received from PHY.
RxJabberPkt INT Yes Indicates the total number of frames that are too long.
RxMutlicastPackets INT Yes Indicates the total number of good multicast packets transmitted.
RxPauseXOFFFrames INT Yes Indicates the flow control frames from the network to pause transmission.
RxPauseXONFrames INT Yes Indicates the flow control frames from the network to resume transmission.
RxRuntPkt INT Yes Indicates the total number of frames that are too short (< 64 bytes).
RxUnicastPackets INT Yes Indicates the total number of good unicast packets transmitted.
StartStatisticTime String Yes Indicates the measurement time for the first NIC statistics. The property is used with the StatisticTime property to calculate the duration over which the NIC statistics are gathered.
StatisticTime String Yes Indicates the most recent measurement time for NIC statistics. The property is used with the StatisticStartTime property to calculate the duration over which the NIC statistics are gathered.
TXBiasCurrentmA Number Yes Indicates the TX Bias current value of Small Form Factor pluggable (SFP) Transceiver.
TXOutputPowermW Number Yes Indicates the TX output power value of Small Form Factor pluggable (SFP) Transceiver.
TemperatureCel Number Yes Indicates the temperature value of Small Form Factor pluggable (SFP) Transceiver.
TemperatureStatus String Yes Indicates the status of Temperature value limits.
TxBroadcast INT Yes Indicates the total number of good broadcast packets transmitted.
TxBytes INT Yes Indicates the total number of bytes transmitted, including host and remote management passthrough traffic. Remote management passthrough traffic is applicable to LOMs only.
TxErrorPktExcessiveCollision INT Yes Indicates the number of times a single transmitted packet encountered more than 15 collisions.
TxErrorPktLateCollision INT Yes Indicates the number of collisions that occurred after one slot time (defined by IEEE 802.3).
TxErrorPktMultipleCollision INT Yes Indicates the number of times that a transmitted packet encountered 2-15 collisions.
TxErrorPktSingleCollision INT Yes Indicates the number of times that a successfully transmitted packet encountered a single collision.
TxMutlicastPackets INT Yes Indicates the total number of good multicast packets transmitted.
TxPauseXOFFFrames INT Yes Indicates the number of XOFF packets transmitted to the network.
TxPauseXONFrames INT Yes Indicates the number of XON packets transmitted to the network.
TxUnicastPackets INT Yes Indicates the total number of good unicast packets transmitted.
VoltageStatus String Yes Indicates the status of voltage value limits.
VoltageValueVolts Number Yes Indicates the voltage value of Small Form Factor pluggable (SFP) Transceiver.
Table 1. Status codes
HTTP status code Extended Information Error Code
200

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\