Skip to main content

iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

PDF

MetricReport

Description

The metric definitions used to create a metric report.

URL

/redfish/v1/TelemetryService/MetricReports/<MetricReport-Id>

Supported HTTP Method and Privileges


HTTP Method	Required Privilege
GET	Login

Supported Properties


Property	Type	Read Only	Description
ReportSequence	String	Yes	The current sequence identifier for this metric report.
MetricReportDefinition	String	Yes	The metric definitions used to create a metric report.
Timestamp	String	Yes	The time associated with the metric report in its entirety. The time of the metric report may be relevant when the time of individual metrics are minimally different.
NOTE Although the timestamp for usage readings such as CPUUsagePctReading, MemoryUsagePctReading, IOUsagePctReading and SystemUsagePctReading in Sensor report and CUPS report may are same, the readings may vary as Sensor reports are generated every minute on an average, while CUPS report are generated instantaneously.
MetricValues	Array	Yes	An array of metric values for the metered items of this Metric.

NOTE In the statistics for NICSensor presented for a NIC port, ignore the property Port1 Partition 1, as Telemetry does not collect port level statistics.

Table 1. Status codes
HTTP status code
200
404