iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

NetworkAdapters

A NetworkAdapter represents the physical network adapter capable of connecting to a computer network.

New URL:

/redfish/v1/Chassis/<System-Id>/NetworkAdapters/<NetworkAdapter-Id>

Old URL:

/redfish/v1/Systems/<System-Id>/NetworkAdapters/<NetworkAdapter-Id>

Table 1. HTTP methods and privileges for NetworkAdaptersThis table provides details about the supported HTTP methods and privileges for the resource.
HTTP method	Required privilege
GET	Login


Property	Type	Read Only	Description
Assembly	Object	True	A reference to the Assembly resource associated with this adapter.
Controllers	Array		The set of network controllers ASICs that make up this NetworkAdapter.
NOTE When GET method is performed on the NetworkAdapter instance while SNAPI state is enabled for the InfiniBand network controller, then Redfish may display two members for the same controller instead of one and the second member may display null value for all the properties.
Manufacturer	String	True	The manufacturer or OEM of this network adapter.
Model	String	True	The model string for this network adapter.
NetworkDeviceFunctions	String	True	A reference to the collection of NetworkDeviceFunctions associated with this NetworkAdapter.
NetworkPorts	String	True	A reference to the collection of NetworkPorts associated with this NetworkAdapter.
PartNumber	String	True	Part number for this network adapter.
SerialNumber	String	True	The serial number for this network adapter.
SKU	String	True	The manufacturer SKU for this network adapter.
Status	String	True	This property shall contain any status or health properties of the resource.

NOTE For modular systems, Redfish may not display the Manufacturer, Model, Serial Number, and Part Number properties for FC based adapters.