iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

Supported Action — ReKey

The ReKey action resets the key on the controller that support encryption of the of drives. This method switches the controller mode.

/redfish/v1/Dell/Systems/<ComputerSystem-Id>/DellRaidService/Actions/DellRaidService.ReKey


HTTP Method	Required Privilege
POST	Login

NOTE A star (*) indicates a required parameter, else the parameter is optional.


Parameter	Type	Value	Description
Keyid	String		Key identifier describes the key. The key ID shall be maximum 32 characters in length and must not have any white spaces.
Mode	ENUM	LKM, DKM, SEKM	Mode of the controller: 1 - Local Key Management (LKM), 2 - Dell Key Manager.
NewKey	String		New controller key. The key shall be maximum of 32 characters in length, where the expanded form of the special character is counted as a single character. The Key shall have one character from each of the following set. Upper case, lower case, number, special character. The special characters in the following set need to be passed as mentioned below and are counted as a single character for the maximum length of the key. &->&, < -><, >->>, "->", and '->'"
OldKey	String		The old controller key.
TargetFQDD	String		This parameter is the FQDD of the target device (Controller).


HTTP Status Code	Extended Information	Error Message Code
400		STOR003, STOR004, STOR006, STOR007, STOR019, STOR020, STOR030, STOR037, STOR038, STOR048, STOR050, STOR053