iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

Supported Action — Reset

This action is used to reset the system.

/redfish/v1/Systems/<ComputerSystem-ID>/Actions/ComputerSystem.Reset


HTTP Method	Required Privilege
POST	ConfigureComponents, Login

NOTE A star (*) indicates a required parameter, else the parameter is optional.


Parameter	Type	Value	Description
ResetType	string	On, ForceOff, ForceRestart, GracefulShutdown, PushPowerButton, Nmi	Following types of reset can be performed On: Turn on the unit. ForceOff: Turn off the unit immediately (nongraceful shutdown). ForceRestart: Shut down immediately and nongracefully and restart the system. GracefulShutdown: Shut down gracefully and power off. PushPowerButton: Simulate the pressing of the physical power button on the unit Nmi: Generate a diagnostic interrupt, which is usually an NMI on x86 systems, to stop normal operations, complete diagnostic actions, and typically, terminate all the processes running in the system.


HTTP Status Code	Extended Information	Error Message Code
204
400	PropertyValueTypeError
400	Base.1.2.PropertyValueNotInList	SYS426
404	Base.1.2.ResourceMissingAtURI	SYS403
409		PSU501, PSU502
500	Base.1.2.InternalError	SYS446