Skip to main content

iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

PDF

Supported Action — UnpackAndAttach

Description

The UnpackAndAttach action is used to extract the drivers for the selected operating system to a USB device that is attached locally to the server for the specified time interval. The following table specifies the return values for UnpackAndAttach action, where the action-execution behavior matches the return-code description.

URL

/redfish/v1/Dell/Systems/<ComputerSystem-Id>/DellOSDeploymentService/Actions/DellOSDeploymentService.UnpackAndAttach

Supported HTTP Method and Privileges


HTTP Method	Required Privilege
POST	Login

Supported Parameters—UnpackAndAttach

NOTE A star (*) indicates a required parameter, else the parameter is optional.


Parameter	Type	Value	Description
ExposeDuration	string		Identifies the amount of time (up to 18 hours) for the drivers to be exposed as an USB device to the host. The default value shall be 18 hours, if the parameter is not specified. The format for intervals is: YYYY-MM-DDThh:mm:ss[.SSS](Z\|(+\|-)hh:mm)
OSName	String		Name of the OS to unpack drivers for, this value shall match one of the strings in OSList returned for GetDriverPackInfo.

NOTE While performing this action for OS deployment, if a GET method is performed to check the status of the job, the PercentComplete property may display null. To check the status, see the TaskStatus or TaskState property.

Supported Status Codes


HTTP Status Code	Extended Information	Error Message Code
200	Base.1.0.Success	OSD1
400		OSD10, OSD11, OSD12,OSD13, OSD19, OSD2,OSD20,OSD27,OSD3, OSD30, OSD35, OSD4, OSD5