Skip to main content

iDRAC9 Redfish API Guide Firmware version: 4.20.20.20

PDF

Supported Action — ConvertToNonRAID

Description

The ConvertToNonRAID action is used to convert a physical disks in RAID state of "Ready" to a Non-RAID state. After the action is successfully executed, the PhysicalDiskView.RAIDStatus property of that physical disk should reflect the new state.

URL

/redfish/v1/Dell/Systems/<ComputerSystem-Id>/DellRaidService/Actions/DellRaidService.ConvertToNonRAID

Supported HTTP Method and Privileges


HTTP Method	Required Privilege
POST	Login

Supported Parameters

NOTE A star (*) indicates a required parameter, else the parameter is optional.


Parameter	Type	Value	Description
PDArray	Array of strings		An array of FQDDs where each identifies a physical drive.

Supported Status Codes


HTTP Status Code	Extended Information	Error Message Code
400		STOR003, STOR004, STOR006, STOR037, STOR038, STOR074