Dell Wyse ThinOS 9.1.3129, 9.1.3112, 9.1.2101, and 9.1.1131 Administrator’s Guide

Configure the ports settings

1. From the desktop menu, click System Setup > Printer.
   The Printer Setup dialog box is displayed.
2. Click the Ports tab, and do the following:

   

   1. Select Port—Select a port from the drop-down list. Selecting LPT1 or LPT2 sets the connection to a direct-connected USB printer. If you are using the Wyse 5070 Extended Thin Client, select LPT2 for the USB printer.
   2. Printer Name—(Required) Enter the name of the printer.
   3. Printer Identification—(Required) Enter the type or model of the printer in the exact text of the Windows printer driver name—including capitalizations and spaces.

      Printer mapping in a Citrix session on ThinOS uses Citrix UPD (Universal Printer Driver). You can enter any string in the Printer Identification field.

   4. Printer Class—Select the printer class from the drop-down list as PS.
   5. Enable the printer device—Select this option to enable the directly-connected printer. It enables the device to be displayed on the remote host.
3. Click OK to save your settings.