Dell Wyse ThinOS 9.1.3129, 9.1.3112, 9.1.2101, and 9.1.1131 Administrator’s Guide

Request the certificate automatically using Wyse Management Suite

1. Log in to Wyse Management Suite.
2. Go to Groups & Configs and select your preferred group.
3. Expand Edit Policies and click ThinOS 9.x.
   The Configuration Control | ThinOS window is displayed.
4. In the Advanced tab, click Privacy & Settings.
5. Click SCEP.
6. Click the Enable Auto Enrollment slider switch to enable automatic certificate enrollment using the SCEP server.
7. Click the Enable Auto Renew slider switch to automatically renew the certificate.
   The client requires a password to renew the client certificate. So if you are using an enrollment password that can expire in a short time, the enrollment password must valid at the time when auto renew behavior happens on the client. Dell Technologies recommends using the admin credentials or a fixed enrollment password to auto enroll, and auto renew certificate.
8. Click the Select Install CA Certificate slider switch to install the root CA's certificate as a trusted certificate after successfully getting the client certificate.
9. Specify the country/region name, state, location, and other details.
10. Click Save & Publish.
    NOTE:You can also configure the SCEP Administrator URL, Admin User, Admin User Password, and Admin User Domain options to request for SCEP certificate. If the enrollment password is not specified, the client uses the SCEP Administrator URL, Admin User, Admin User Password, and Admin User Domain options to request SCEP. If you specify the enrollment password, the enrollment password is used for SCEP, even though the password entered is invalid. In this scenario, the SCEP Administrator URL, Admin User, Admin User Password, and Admin User Domain options are ignored.