Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Chromebook 3110 2-in-1 Service Manual

PDF

Removing the display cable

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Remove the display assembly.
  4. Remove the display panel.

About this task

The following image indicates the location of the display cable and provides a visual representation of the removal procedure.

Removing the display cable

Steps

  1. Rotate the left display hinge and the left hinge cap upwards toward the display cover. The display hinge should be at an angle of 0 degrees while the hinge cap should be at an angle of 90 degrees (or of the position of a closed laptop).
    NOTE:Ensure that the display hinge is rotated only to the unlock position, the hinge cap does not rotate until the display hinge is in the unlock position.
  2. Remove the hinge rubber that secures the left hinge cap.
  3. Gently pull the display cable out of the left hinge cap.
  4. Disconnect the camera cable from the camera module.
  5. Peel back the tape, close to the left hinge cap that secures the display cable in place.
  6. Peel and unroute the display cable from the routing channels on the display back-cover.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\