This section provides you information about External Key Management properties.
System Administrators can add a cluster, view VDC EKM mapping information, and rotate keys on the
Settings > Key Management page in the ECS Portal.
Table 1. Key Management properties
Field
Description
Cluster Name
Name of the cluster
Cluster Type
Vendor Type
Server Count
Total number of servers that have been created for the cluster
Status
Indicates the status of the cluster. When first created, it is in the 'UNACTIVATED' status. When activation is performed, the status changes to match the step in the activation process.
FQDN/IP
FQDN or IP address of the EKM Server
Server Host
Server host is provided in the certificate that is used to identify the client associated with the identity store.
Port
Port number that is associated with the KMIP server. The port number is used for communicating between ECS and the external key server. Default is 5696.
Import Server Certificate
Import Server Certificate is associated with the key server that is presented to ECS for validation.
Import Revocation Certificate
Compromised certificate that is not accepted (can be an empty file).
Import Identity Store
Client certificate, signed by server and encrypted into .p12 file.
Identity Store Password
Identity store certificate password.
Username
User name must match that is defined on the Gemalto key server. Optional field for Gemalto.
Password
Password for the client that is defined on the Gemalto key server. Optional field for Gemalto.
Device Serial Number
Provide the device serial number. Optional field for SKLM.
Device ID
Provide the device ID. Optional field for SKLM.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\