Configuring VLAN Tags for Member Interfaces
To configure and verify VLAN tags for individual members of a port channel, perform the following:
- Configure VLAN membership on individual ports
INTERFACE modeDellEMC(conf-if)#vlan tagged 2,3-4
- Use the switchport command
in INTERFACE mode to enable Layer 2 data transmissions through an
individual interface
INTERFACE modeDellEMC(conf-if)#switchport
- Verify the manually configured VLAN membership
(show interfaces switchport interface command).
EXEC mode
DellEMC(conf)# interface tengigabitethernet 1/1 DellEMC(conf-if-te-1/1)#switchport DellEMC(conf-if-te-1/1)# vlan tagged 2-5,100,4010 DellEMC#show interfaces switchport te 1/1 Codes: U - Untagged, T - Tagged x - Dot1x untagged, X - Dot1x tagged G - GVRP tagged, M - Trunk, H - VSN tagged i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged Name: TenGigabitEthernet 1/1 802.1QTagged: True Vlan membership: Q Vlans T 2-5,100,4010 DellEMC#