Dell G7 7590 Service Manual

Procedure

1. Remove the four screws (M2x4) that secure the display assembly to the palm-rest assembly.
2. Peel the tape that secures the display cable to the system board.
3. Open the latch and disconnect the display cable from the system board.
   

   CAUTION Exercise care when flipping the computer.
4. Flip the computer over.
5. Pry the hinge cover from the palm-rest assembly and lift it off the palm-rest assembly.
   
6. Remove the eight screws (M2x4) that secure the left and right hinges to the palm-rest assembly.
   
7. Slide the display assembly to front and release it from the tabs on the palm-rest assembly.
8. Release the display cable from the slot on the palm-rest assembly.
9. Lift the display assembly off the palm-rest assembly.